Models INFRA BAF

INFRA BAF U

'INFRA BAF U' radiant tubes work with any type of gas and are totally sealed against the environment in which they are installed. 
They are produced in two versions for installation in farms: 'INFRA 6B' 6 metres long and 'INFRA 9B' 9 metres long. 
'INFRA BAF U' radiant tubes are complete with:
• 'BAF 28 kW burner with electric power supply 230V 50 Hz.
• Single-phase extractor fan 100 W - 230 V - 50/60 Hz, protection IP 55.
• U-shaped radiant tube in silicone painted aluminium steel for the standardversion and in stainless steel AISI 321 for the optional version.
• Reflecting hood, width 52 cm, in stainless steel AISI 430 for the standard version and in stainless steel AISI 304 for the optional version.
• Support brackets and accessories in stainless steel AISI 430 for the standard version and in stainless steel AISI 304 for the optional version.
• Possibility of installing the burner and the extractor fan outside.
• Installation height above ground: minimum 1 metre, maximum 6 metres.
• Intense, non uniform radiation along the length of the radiant tube.
• Maximum temperature in contact with the radiant tube 400/480°C.

INFRA BAF M

'INFRA BAF M' radiant tubes work with any type of gas and are totally sealed against the environment in which they are installed. 
They are produced in four versions for installation in farms: 'INFRA BAF 6-9-12-15' 6-9-12-15 metres long. 
'INFRA BAF M' radiant tubes are complete with:
• 'BAF 28 kW burner with electric power supply 230V 50 Hz.
• Single-phase extractor fan 100 W opposite the burner - 230 V - 50/60 Hz, protection IP 55.
• Linear radiant tube with diameter 108 mm in silicone painted aluminium steel for the standard version and in stainless steel AISI 321 for the optional version.
• Reflecting hood, width 35 cm, in stainless steel AISI 430 for the standard version and in stainless steel AISI 304 for the optional version.
• Support brackets and accessories in stainless steel AISI 430 for the standard version and in stainless steel AISI 304 for the optional version.
• Possibility of installing the burner and the extractor fan outside.
• Installation height above ground: minimum 1 metre, maximum 4 metres.
• Intense, non uniform radiation along the length of the radiant tube.
• Maximum temperature in contact with the radiant tube 300/350°C.

INFRA BAF MC

'INFRA BAF MC' radiant tubes work with any type of gas and are totally sealed against the environment in which they are installed. 
They are produced in three types with burner centre distance 9.12.18 metres;
'INFRA BAF MC' radiant tubes are complete with:
• Two or more 'BAF 28 kW burners inserted in the radiant tube.
• Linear radiant tube with diameter 121 mm in silicone painted aluminium steel.
• Reflecting hood, width 40 cm, in stainless steel AISI 430.
• Steel support brackets and accessories.
• Electric lifting system (if required in the farm).
• Variable height above ground depending on applications: minimum 1 metre, maximum 3 metres.
• Intense, non uniform radiation along the length of the radiant tube.
• Maximum temperature in contact with the radiant tube 280/320°C.

INFRA BAF MSV

'INFRA BAF MSV' radiant tubes do not have an extractor fan. 
They heat by radiation while the collective fumes duct heats by convection, recycling the combustion fumes. 
The general characteristics of the 'INFRA BAF MSV' radiating modules are the same as those of the 'INFRA BAF M' radiant tube.
• Common fumes duct in aluminium steel.
• Maximum temperature in contact with the fumes duct 100/120°C.
• Special couplings with manual regulation for connecting the radiant tubes to the fumes duct.
• Electronic fumes capacity variation.
• Automatic air locks for burner combustion air.
• Possibility of installing one or more support burners upstream from the fumes duct.
• No limit of application of the 'INFRA BAF MSV' radiant tubes on the fumes ducts.
• No limit in length for the fumes duct.
• Very low fuel consumptions.