Modelli radiatori a gas KING
KING CONVECTORS WITH PILOT FLAME
These convectors have a balanced-flow with piezo-electric lighting of pilot burner, a security with automatic control by thermocouple and modular gas valve which, in case of flame failure, stops immediately the supply of gas to the burner. Lighting, extinction, regulation of heating level are made using just one knob, graduated from 1 to 7, which allows an easy thermostatic regulation of room temperatures between 6°C and 38°C. Convectors have a reduced height and they don’t need electric connection. The body has a grid on the front to increase direct radiation from the heat exchanger and a grid on the upper part to increase convection, allowing a high thermal efficiency.
KING CONVECTORS WITH PILOT FLAME AND FAN
The caracteristics of security, functionality and control are the same of previous models with pilot flame, but there is also a tangential fan controlled by a thermostat, with a two speed selector, which needs electrical connection. Due to the presence of the fan, it’s possible tom heat large volumes with the advantage of reducing the warm-up time.
KING ELECTRONIC CONVECTORS
These balanced-flow models have an electric lighting of main burner (without pilot flame) by an electronic device, with a flame control by ionization, with a specific electrode. The gas valve is double-tight, with an incorporated gas stabilizer and gas filter, a TV screening and pressure measurement connections. The main board is including a two poles switch with led, a stop red led, a normal working conditions green led and an optional timer for day or week programming. These convectors have a reduced height.
KING ELECTRONIC CONVECTORS WITH FAN
These balanced-flow models have an electric lighting of the main burner (without pilot flame) by an electronic device, with a flame control by ionization with a specific electrode. The gas valve is double-tight, with an incorporated gas stabilizer and a gas filter, a TV screening and pressure measurement connections. The main board is including a two poles switch with led, a two speeds selector for the tangential fan, a thermostat, a stop red led, a normal working conditions green led and, as an option, a timer for day or week programming (VET). Due to the presence of the fan, it’s possible to use these convectors to heat large volumes, with the advantage of reducing the warm-up time.
CAST IRON KING ELECTRONIC CONVECTORS WITH FORCED FLOW
These convectors have an electronic lighting and a forced flow. Components, security devices and switches are the same than in the previous models, but there is also a centrifugal fan for suction of combustion air, and exhaust. All the working cycle is controlled by an electronic device and by a differential pressure switch. The diameter of the pipe for burning air suction and exhaust is 60 mm. with a length of the coaxial pipe up to 5 m.. There is the possibility to connect separately the exhaust pipe and the air pipe. The main board is including a two pole general switch with led, a two speeds selector for the tangential fan, a thermostat, a stop red led, a normal working conditions green led and, as an option, a timer for day or week programming (VET). There is also the possibility to have a special version of these convectors (four models) with a side coaxial output (right or left) to solve difficult installation situations. All models are supplied with a humidifying device. All these models have the possibility to use a stainless steel wind-proof wall level grid.
STAINLESS STEEL KING ELETRONIC CONVECTORS - FORCED FLOW
These convectors have electronic lighting and forced flow by a centrifugal fan for suction of combustion air and exhaust. The heat exchanger is built of stainless steel and all the combustion cycle is airtight and controlled by an electronic device and a differential pressure switch. The heat exchange takes place by forced convection and radiation. The gas valve is of the type 'slow lighting', double-tight with gas filter, stabilizer and pressure measurement connections. The air pipe has a diameter of 100 mm. and the coaxial pipe may have a length up to 5 m. There is also the possibility to have a coaxial lateral pipe connection (right or left or below) and a separate connection for air and exhausts. The centrifugal fan for air recirculation has two speeds in the standard models and the option for a third speed.
There is the possibility of air ducting. The electrical board is including a two pole switch with led, a stop red led, a normal functioning conditions green led, a two speed selector for the fan. There is the possibility of adding a daily or weekly timer. All these models have as standard supply the stainless steel wall level terminal grid and the air humidifying device. Two colors are possibile for the body: ivory and brear-wood.
